Open IdeaMaker

Import stl. files for the base, joint, and lock. If asked to scale to millimeters press "Yes"

Space out so they are not touching, make sure they are on the print bed. If they are off the print bed, the object will appear red. If they are on the print bed, they should appear white.

Add "auto-generated" supports

Set the infill to 50%

Click "Start Slicing". Change the printer type to Raise3D E2CF. Then change the filament type to PA12 CF 1.75mm, for Nylon.

Ensure the extruder with the nylon matches the extruder printing the piece on the slice.

Export G-code and download to a USB, then print on a Raise 3D E2CF.