Changes to Step #54
Step Lines
| + | [title] Upgrading the Ender (4/5) Extrusion upgrades (Motor Upgrades (10/16)) |
|---|---|
| + | [* 9] Note: The idler arm is under spring tension and will fly off to Narnia if you don't hold it in place |
| + | [* 1] Undo and remove the idler arm screw while holding it in place. |
| + | [* 1] Once the screw is gone, slowly remove the arm up and out, making sure not to let the spring fly off into oblivion |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added