Changes to Step #52
Step Lines
+ | [title] Upgrading the Ender (4/5) Extrusion upgrades (Motor Upgrades (8/16)) |
---|---|
+ | [* 1] Stage everything together for convenience. |
+ | [* 1] Your two hex rounded hex screws should be on the bowden side of the frame, with your countersunk screw going in the bottom right corner. |
+ | [* 1] The Idler arm hinge screw fits through the top right corner |
+ | [* 1] You’ll note that the idler arm spring is still loose, and will be held in place with screws taken from the printer itself. |
Image 1
No previous image
Added
Image 2
No previous image
Added