Changes to Step #34
Step Lines
| + | [title] Upgrading the Ender (2/5) Build plate upgrade (3A/7) |
|---|---|
| + | [* 1] THIS IS SECTION A |
| + | [* 1] Use the screwdriver to hold the screw in place while you undo the level adjustment wheel so that it comes off of the printer entirely. |
| + | [* 1] Once it’s off, you can simply push on the screw from below and remove it from the printer. |
| + | [* 1] At this point, the spring will also be loose, so make sure you store that away as well, even though it won’t be needed from now on. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added