Changes to Step #22
Step Lines
| + | [title] Upgrading the Ender (1/5) X/Y Axis movement (Y axis movement (7/8)) |
|---|---|
| + | [* 1] Undo the two screws holding the Y axis end stop in place |
| + | [* 1] Move it forward so that screw B is in screw A’s spot. Make sure to tighten this enough so the endstop won’t rotate when the build plate hits it. |
| + | [* 1] You will end up with an extra screw that I recommend you keep in a safe place in case you want to undo the process (This step sacrifices a couple millimeters’ worth of print volume in order to give the motor space) |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added