Changes to Step #19
Step Lines
| + | [title] Upgrading the Ender (1/5) X/Y Axis movement (Y axis movement (4/8)) |
|---|---|
| + | [* 1] Place the sunken side of the damper onto the stepper motor so that the raised section on the other side faces upwards. |
| + | [* 1] Fasten the two corners of the damper in contact with the motor with two of the screws originally used to hold the motor in place. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added