Changes to Step #17
Step Lines
| + | [title] Upgrading the Ender (1/5) X/Y Axis movement (Y axis movement (2/8)) |
|---|---|
| + | [* 1] Warning: The motor is under tension from the belt, and might fly out of its bracket, off the table, and down a well if something doesn't hold it in place |
| + | [* 1] Undo the four hex bolts while using your hand to hold the motor in place. |
| + | [* 1] Gently tilt the motor housing backwards and out of its bracket, then disconnect its wire and put everything in a safe place |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added