Changes to Step #6
Step Lines
| + | [title] Prepare gcode file for 1st Bag Carrier |
|---|---|
| + | [* 1] ''This is an optional step. If you are using a [guide|123|customized toolkit], jump to Step 7.'' |
| + | [* 1] Download the model files for [link|https://thangs.com/designer/Cothlory/3d-model/1st%20Bag%20Carrier-1052716|1st Bag Carrier]. |
| + | [* 1] Import the file to PrusaSlicer. |
| + | [* 1] The model should be oriented same as shown in image 1. If not, change the print orientation. |
| + | [* 1] Select ***Support on build plate only*** for ***Supports***. |
| + | [* 1] Click ***Slice now***. If set up correctly, you should see the similar support result shown in image 2. |
Image 1
No previous image
Added
Image 2
No previous image
Added