Changes to Step #4

Edit by Coco M1lk —

Edit approved by Coco M1lk

Before
After
Unchanged

Step Lines

[title] Prepare gcode file for 1st Bottle Opener
[* 1] ''This is an optional step. If you are using a [guide|123|customized toolkit], jump to Step 7.''
-[* 1] Download the model files for 1st Ver. Toolkits: [link|https://thangs.com/designer/Cothlory/3d-model/1st%20Bottle%20Opener-1052715|1st Bottle Opener], [link|https://thangs.com/designer/Cothlory/3d-model/1st%20Pen%20Holder-1052717|1st Pen Holder], [link|https://thangs.com/designer/Cothlory/3d-model/1st%20Bag%20Carrier-1052716|1st Bag Carrier].
-[* 1] For 1st Bottle Opener:
+[* 1] Download the model files for [link|https://thangs.com/designer/Cothlory/3d-model/1st%20Bottle%20Opener-1052715|1st Bottle Opener].
+[* 1] Import the file to PrusaSlicer.