Changes to Step #4
Step Lines
| + | [title] Prepare gcode file for 1st Bottle Opener |
|---|---|
| + | [* 1] ''This is an optional step. If you are using a [guide|123|customized toolkit], jump to Step 7.'' |
| + | [* 1] Download the model files for [link|https://thangs.com/designer/Cothlory/3d-model/1st%20Bottle%20Opener-1052715|1st Bottle Opener]. |
| + | [* 1] Import the file to PrusaSlicer. |
| + | [* 1] The nut side should lie on the build plate. If not, change the print orientation as shown in image 1. |
| + | [* 1] In the bar on the left, use ***Paint-on supports*** function to paint support areas inside the nut part, as shown in image 2. Then, select ***For support enforces only*** for ***Supports***. |
| + | [* 1] Click ***Slice now***. If set up correctly, you should see the similar support result shown in image 3. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added