Changes to Step #3

Edit by Coco M1lk —

Edit approved by Coco M1lk

Before
After
Unchanged

Step Lines

[title] Prepare gcode file for E-nabled Hand Clip
[* 1] Download [link|https://thangs.com/designer/Cothlory/3d-model/E-nabled%20Hand%20Clip-1052712|the model file] for the E-nabled Hand Clip.
[* 1] Import the file to PrusaSlicer.
-[* 1] One side of the model should lie on the build plate. If not, change the print orientation as shown in the image 1.
+[* 1] One side of the model should lie on the build plate. If not, change the print orientation as shown in image 1.
[* 1] Select ***Support on build plate only*** for ***Supports***; set ***Scale factors*** appropriately.
-[* 1] Click ***Slice now***. If set up correctly, you should see the similar result shown in the image 3.
+[* 1] Click ***Slice now***. If set up correctly, you should see the similar result shown in image 3.