Changes to Step #3
Step Lines
+ | [title] Prepare gcode file for E-nabled Hand Clip |
---|---|
+ | [* 1] Download [link|https://thangs.com/designer/Cothlory/3d-model/E-nabled%20Hand%20Clip-1052712|the model file] for the E-nabled Hand Clip. |
+ | [* 1] Import the file to PrusaSlicer. |
+ | [* 1] One side of the model should lie on the build plate. If not, change the print orientation as shown in image 1. |
+ | [* 1] Select ***Support on build plate only*** for ***Supports***; set ***Scale factors*** appropriately. |
+ | [* 1] Click ***Slice now***. If set up correctly, you should see the similar result shown in image 3. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added