Changes to Step #2

Edit by Coco M1lk —

Edit approved by Coco M1lk

Before
After
Unchanged

Step Lines

[title] Slicer settings
[* 1] In this step, we will modify the overall print settings for the CAM software. In this guideline, all the instructions are for PrusaSlicer.
[* 1] Select ***0.20mm SPEED*** for ***Print settings***; select ***Prusament PETG*** for ***Filament***; select ***50%*** for ***Infill***; uncheck ***Brim***.
[* 1] Change the support type to ***Organic***. This is in the ***0.20mm SPEED*** preset -> ***Support material*** -> ***Options for support material and raft*** -> ***Style***.
[* 1] If your calculated scale is not 100% n Step 1, click on the model in the bar on the right. Insert your calculated scale in ***Scale factors***.
+[* 1] If not specified, this print setting will be used by default in subsequent sections of this guideline.