Changes to Step #4
Edit by Tristan Boyer —
Edit approved by Tristan Boyer
- Before
- After
- Unchanged
Step Lines
| [title] Slice and Print STL. Files: Gauntlet | |
| [* 1] Open IdeaMaker | |
| [* 1] Import stl. files labeled "Bike Handle Adapter" | |
| [* 1] Add "auto-generated" supports | |
| [* 1] Set infill to 50% | |
| [* 1] Press "Start Slicing" | |
| [* 1] Select "PLA 1.75mm" | |
| [* 1] Make sure the extruder with the PLA filament matches the extruder printing the gauntlet. | |
| + | [* 1] Export G-Code and download to a USB, then print on a Raise 3D E2CF. |