Changes to Step #3

Edit by Tristan Boyer —

Edit approved by Tristan Boyer

Before
After
Unchanged

Step Lines

[title] Slice and Print STL. Files: Adapter
[* 1] Open IdeaMaker
[* 1] Import stl. files for the adapter, labeled "ninja"
[* 1] If asked to scale to millimeters press "okay"
[* 1] The piece should be laying flat
[* 1] Change infill density to 50%
[* 1] Go into printer settings "advanced", change the nozzle to 240 degrees, bed temp to 50 degrees, and print speed to 15mm/sec
[* 1] Press "Start Slicing". Change the filament to TPU. Make sure the extruder with the TPU filament matches the extruder printing the adapter.
-[* 1] Download to USB, then print on a Raise 3D.
+[* 1] Export G-code and download to a USB, then print on a Raise 3D.