Changes to Step #3
Edit by Tristan Boyer —
Edit approved by Tristan Boyer
- Before
- After
- Unchanged
Step Lines
| [title] Slice and Print STL. Files: Adapter | |
| [* 1] Open IdeaMaker | |
| [* 1] Import stl. files for the adapter, labeled "ninja" | |
| [* 1] If asked to scale to millimeters press "okay" | |
| [* 1] The piece should be laying flat | |
| [* 1] Change infill density to 50% | |
| + | [* 1] Go into printer settings "advanced", change the nozzle to 240 degrees, bed temp to 50 degrees, and print speed to 15mm/sec |
| [* 1] Press "Start Slicing" | |
| - | [* 1] Change the filament to TPU |
| - | [* 1] Make sure the extruder with the TPU filament matches the extruder printing the adapter. |
| + | [* 1] Change the filament to TPU. Make sure the extruder with the TPU filament matches the extruder printing the adapter. |