Changes to Step #3
Edit by Tristan Boyer —
Edit approved by Tristan Boyer
- Before
- After
- Unchanged
Step Lines
| + | [title] Slice and Print STL. Files: Adapter |
|---|---|
| + | [* 1] Open IdeaMaker |
| + | [* 1] Import stl. files for the adapter, labeled "ninja" |
| + | [* 1] If asked to scale to millimeters press "okay" |
| + | [* 1] The piece should be laying flat |
| + | [* 1] Change infill density to 50% |
| + | [* 1] Go into printer settings "advanced", change the nozzle to 240 degrees, bed temp to 50 degrees, and print speed to 15mm/sec |
| + | [* 1] Press "Start Slicing". Change the filament to TPU. Make sure the extruder with the TPU filament matches the extruder printing the adapter. |
| + | [* 1] Export G-code and download to a USB, then print on a Raise 3D. |