You're viewing a previously published revision of this guide.  View latest revision

Older
Aug 07, 2019 - 08:08:38
Aug 07, 2019 - 09:08:32 Aug 07, 2019 - 09:08:44 Aug 07, 2019 - 08:08:38 Aug 07, 2019 - 08:08:01 Aug 16, 2018 - 08:08:16 Aug 16, 2018 - 08:08:15 Aug 13, 2018 - 09:08:26 Aug 13, 2018 - 08:08:29 Aug 13, 2018 - 08:08:31 Aug 13, 2018 - 08:08:16 Aug 13, 2018 - 08:08:29 Aug 13, 2018 - 08:08:08 Aug 13, 2018 - 08:08:59 Aug 13, 2018 - 08:08:15 Aug 13, 2018 - 08:08:39 Aug 13, 2018 - 07:08:30 Aug 13, 2018 - 07:08:06 Aug 13, 2018 - 07:08:35
Newer

How to Master the Micro Servo

Written By: Aiden Kunkler-Peck (and one other contributor)
  • Comments: 0
  • Favorites: 0
  • Completions: 1

Difficulty

Easy

Steps

4

Time Required

00:10:00

Sections

1

Flags

0

Quiz

0

  1. First, you must acquire a micro servo, an Arduino Uno (preferably) with a usb/Arduino cable, and three male to male jumper wires. First, you must acquire a micro servo, an Arduino Uno (preferably) with a usb/Arduino cable, and three male to male jumper wires. First, you must acquire a micro servo, an Arduino Uno (preferably) with a usb/Arduino cable, and three male to male jumper wires.

    • First, you must acquire a micro servo, an Arduino Uno (preferably) with a usb/Arduino cable, and three male to male jumper wires.

  2. Connect the three jumper wires to the designated ports on the Arduino. The ports will vary based on the Arduino you use, if you don't have access to an Uno then just google to setup to your Arduino. The ports will vary based on the Arduino you use, if you don't have access to an Uno then just google to setup to your Arduino.

    • Connect the three jumper wires to the designated ports on the Arduino.

    • The ports will vary based on the Arduino you use, if you don't have access to an Uno then just google to setup to your Arduino.

  3. Now it's your turn to try some coding!

    • Now it's your turn to try some coding!

    • Follow this link to download Arduino if it is not already on your compuer: https://www.arduino.cc/en/Main/Software

    • Once downloaded, open the application and continue to the next step.

  4. Use this link to get some source code for the part and start learning how to servo functions.

    • Use this link to get some source code for the part and start learning how to servo functions.

    • Link to Program

Author

with 1 other contributor

Aiden Kunkler-Peck

Member since: 7/5/18

229 Reputation

4 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 125