Difficulty
Easy
Steps
2
Time Required
03:00:00 - 05:00:00
In Progress
This guide is currently being written. Reload periodically to see the latest changes.
User-Contributed Guide
This guide is not managed by the site's staff.
Quiz
0
Introduction
This is a device that clips onto the palm of the hand. To use this design, the user must have a palm large enough to mount the device and a functioning hand to attach and detach the toolkit.The E-nabled Hand Clip design consists of one main body clip and three 1st Ver. Toolkits.
-
-
Measure the thickness of your hand at your purlicue in milimeter
-
Divide this number by 24, this is the printing scale for all the parts you would like to set
-
For example, my purlicue is 28 mm in thickness, so in the following steps, I will print all the parts in (28/24) = 117% scale.
-
-
-
Download the model file for the E-nabled Hand Clip.
-
Import the file to CAM software for 3D printing. In this guideline, all the instructions are for PrusaSlicer.
-
